 |
 |
|
|
Analog Surface Resistance Meter |
|
|
|
|
|
• Analog Compliance Verification Surface
Resistance Checker
Used for determining if a surface is dissipative,
conductive or insulative
• Automatic Test Range Voltage Selection Per
Compliance Verification ESD TR53
Starts tests at 10 volts and automatically switches to
100 volts if the measurement is over 10E5 ohms
• Portable Operation with 9 Volt Battery
No charging or sourcing of special batteries needed
• LED Illuminates When Battery Power is Low
Prevents operator from making bad measurements
• Test Kit Includes Set of Five Pounds Electrodes
(41275) and Leads (41295)
Use with the meter to measure resistance point-to-point
(RTT) and resistance to ground (RTG)
• NIST Calibrated with Certificate
Calibrated with accepted procedures and standards
traceable to the National Institute of Standard Technology
• Made in America |
 |
|
|
 |
|
| Item |
Description |
1-4 |
5+ |
| 41294 |
Analog Surface Resistance Meter Test Kit |
$620.00 |
$576.60 |
| 41295 |
Analog Surface Resistance Meter Test Leads |
$ 25.00 |
$ 23.25 |
| 41296 |
Analog Surface Resistance Meter Only |
$500.00 |
$465.00 |
| 41275 |
5 Lb. Electrodes for Surface Resistance Meter |
$ 59.17 |
$ 55.01 |
|
 |
|
|
|
“A Compliance Verification Plan shall be established to ensure the Organization’s fulfillment of the technical requirements of the ESD Control Program Plan. Process monitoring (measurements) shall be conducted … The Compliance Verification Plan shall document the test methods and equipment used for process monitoring and measurements. … Compliance verification records shall be established and maintained to provide evidence of conformity to the technical requirements. The test equipment selected shall
be capable of making the measurements defined in the Compliance Verification Plan.” [ANSI/ESD S20.20-2007 section 7.3] |
 |
|
|
|
|
|
|
|
|
|