• Portable tester powered by 9 volt battery; no AC adapter needed
• Portable and small size; convenient for supervisor to spot check users on shop floor verifying test system integrity
• For use with single wire wrist straps test per ESD TR53
• Battery powered 9 volt tester; no adapter needed
• Test results include fail low, pass, and fail high - if wrist strap fails, identifies type of failure
• Test can be performed during normal use at the workstaion; improved productivity, workers can test with out having to leve the workstation
• Operators can test wrist strap with a simple touch at workstation, improving productivity
• Range : 750 Kilohms - 10 Megohms
• Provided with calibration to NIST traceable standards
• Superior warranty
• Made in America

“Compliance verification should be performed prior to each use (daily, shift change, etc.). The accumulation of insulative materials may increase the foot grounder system resistance. If foot grounders are worn outside the ESD protected area testing for functionality before reentry to the ESD protected area should be considered.” (ESD SP9.2 APPENDIX B - Foot Grounder Usage Guidance)

“A log should be maintained which verifies that personnel have tested their personal grounding devices.” (ANSI/ESD S20.20 Paragraph 6.2.2.2 Personnel Grounding Guidance)

“Frequency of Functional Testing: The wrist strap system should be tested daily to ensure proper electrical value. Nominally, the upper resistance reading should be < or = 10 megohms or a user-defined value.” (ANSI/ESD S1.1-2006 Annex A3)