|
|
Dual-wire wrist strap provides redundancy - even if one dual wire wrist strap conductor is severed, operator has reliable path-to-ground with other wire
Mono plug designed to be used with a dual-wire wrist strap monitor. Not compatible with banana plug grounds.
Comfortable, long wearing, superior contact metal band with more reliable path-to-ground*
Stainless stell metal band with coated non-conductive outer surface
Metal parts are corrosion resistant - will not show evidence of rust after 24 hour submersion into salt solution
Adjustable, may be fitted to most people
4mm dual-wire snaps
Coil cord exceeds 16,000 ESD S1.1 bending flex test by 400%
Coil cord contains 1 megohm current limiting resistor with female snaps on one end and monoplug on the other end
Date coded for quality
What the ESD Association says about wrist straps: * "Note: Metal expansion bracelet style wrist cuffs may trap moisture underneath and can be more effective for people with dry skin." [ESD Handbook TR20.20 section 5.3.2.4.3]
Per ESD Handbook TR20.20 section 5.3.9.1 Wrist Strap Checkers - “Wrist strap checkers have historically been the primary tool for testing the operation of the wrist strap system including, the wristband, grounding cord and most importantly, the electrical integrity of the contact between the wristband and the wearer. Wrist strap checkers measure the resistance of the entire system.”
For dry skin conditions, see Reztore ESD Hand Lotion
|
|