| |
Click HERE for a Selection Chart on ESD Wrist Straps. |
| |
|
- Patented revolutionary magnetic interconnect technology (U.S. Patent 5,004,425)
Creates magnetic connection between wristband and coil cord; meets ESD S1.1, including disengagement force test (1-5 lbs)
- Dual-wire wrist strap provides redundancy
If one dual wire wrist strap condutor is severed, operator still has reliable path-to-ground with other wire
- Compatible with 3M and other brand Continuous Monitors
- More reliable design
Longer lasting, no moving parts
-
Durable, lightweight fabric
Some users prefer the softness, comfort and flexibility of this material
-
Adjustable
Only one item to stock; may be fitted to almost all people
-
Locking clasp
Band locked so it will not slip
-
UL Listed
-
Superior resistor connection strain relief
Superior reliability. Greatly exceeds ESD S1.1 Bending Life Test. Tested at over 1,000,000+ flex cycles.
-
Made in America
What the ESD Association says about testing wrist straps:
Per ESD Handbook TR20.20 section 5.3.9.1 Wrist Strap Checkers - “Wrist strap checkers have historically been the primary tool for testing the operation of the wrist strap system including, the wristband, grounding cord and most importantly, the electrical integrity of the contact between the wristband and the wearer. Wrist strap checkers measure the resistance of the entire system.”
Jewel® Wrist Bands meet and exceed the Wrist Band and Wrist Cord requirements of ANSI/ESD S20.20.
ANSI/ESD S20.20 Paragraph 6.2.2.1 Personnel Grounding Requirement "All personnel shall be bonded or electrically connected to ground or contrived ground when handling ESD sensitive items. When personnel are seated at ESD protective workstations, they shall be connected to the common point via a wrist strap system."
"Daily (Wrist Strap) testing may be omitted if constant monitoring is used." (ESD S1.1 Section 6.1.3)
|
|