• Economical Dual Layer Vinyl Material
  Versatile dissipative worksurface table mat provides reliable path to ground and allows for use with continuous monitors.
• Dissipative Worksurface - 10E6 - 10E8 Ohms RTT
  Controls charge removal; meets worksurface required limits of ANSI/ESD S20.20 and recommendations of ANSI/ESD S4.1
• Dissipative Light Emboss Top Layer
  Non-glare finish makes it easier to identify small parts 
• Non-Humidity Dependence
  Provides consistent electrical performance regardless of ambient humidity
• Dimensionally Stable and Lays Flat
  Maintains dimensions and lays flat at work station
• Mat Top Kit Includes:
  (1) Bench mat as specified.
  (1) 13160 common point ground cord,
  (1) 12000 universal snap kit
• Lead-Free RoHS Compliant
• Made In America
  
  

RTT (front side): 10E6 - 10E8 Ohms per ANSI/ESD S4.1
RTT (back side): <10E5 Ohms per ANSI/ESD S4.1
Thickness: 0.060" (1.5mm)

Per ESD Association: "The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point." ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 x 10E9 ohms. "If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x 10E6 ohms." "Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration." (Ref: TR 20.20 section 5.3.1).

Due to variations in computer monitor displays, color shown may not be exact. For true accurate color, please email Service@ESDSystems.com to request an actual sample.