• Designates work area as lead-free
• Excellent for use in assembly operations
  Where matting may come in contact with hot soldering iron tips or solder splashes
• Volume electrical properties protect static sensitive products
• Static dissipative top layer
  With a conductive bottom of synthetic rubber
• Smooth finish
• Easily maintained with Resque 2 Work Surface Cleaner
• Includes one installed 10mm snap socket
• Resistance Top to Top (RTT): 10E7 - 10E8 Ohms, per S20.20 STM S4.1
• Resistance Top to Ground point (RTG): 10E6 - 10E8 Ohms, per S20.20 STM S4.1
• Thickness: 0.060"
• Our Reztore™ Surface & Mat Cleaner is great for cleaning worksurface mats
• Lead-free RoHS compliant
• Made in America

"The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point." ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 x 10E9 ohms. "If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x 10E6 ohms." "Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration." (Ref: TR 20.20 section 5.3.1).

Due to variations in computer monitor displays, color shown may not be exact.  For true accurate color, please email Service@ESDSystems.com to request an actual sample.