| |
Ready-to-use unit designed for use in applications and areas where contamination can create manufacturing or handling problems.
All ionizers are tested and comply with ANSI EOS/ESD S3.1-1991
Our air nozzle and hand gun ionizers are a great tool to combat ElectroStatic Attraction [ESA]
NOTE: Air nozzles are recommended for intermittent applications. They require filtered, dry, non-combustible gases, such as compressed shop air or nitrogen. If using nitrogen, contact the factory for modifications and adjustments needed.
|
| |
|
- Point-Of-Use Compressed Air Ionizer
Neutralize electrostatic charges to eliminate attraction, visual imperfections, and contamination issues by dislodging charged dust and debris
- Fast < 1 second Discharge Times with ±30 volt offset voltage balance
Tested per ANSI/ESD STM 3.1
- Modular Design with 7 Foot ESD Protective Hose with Trigger Switch
Allows operators freedom of motion and minimizes awkward or unsupported positions
- Use Filtered Air or Nitrogen – No Adjustment Required
Allows for quick change between air supply
- Console Mounting Hardware Included
Allows Chargebuster Ion Gun Console to be mounted in convenient location
- Quick filter replacement feature
Minimizes down time
- 1-Year Limited Warranty
- To see ion gun in use, click here
- Made in Amercia
The Chargebuster Ion is a point-of-use ionizer using compressed air or nitrogen to neutralize electrostatic charges from a small, defined area and/or to facilitate removal of charged particles. These ready-to-use units are designed for use in applications and areas where ElectroStatic Attraction contamination create manufacturing or handling problems (Ref: ESD Handbook TR 20.20 paragraph 5.3.6.5.2.4 Point of Use Ionization). The Chargebuster Ion meets or exceeds the recommended technical requirements of ANSI/ESD S20.20 tested in accordance with ANSI/ESD S3.1.
|
|