|
- One coat system saves labor
- The only conductive ONE COAT 2-part epoxy on the market
- Epoxy is a tight cross-linking thermosetting epoxide polymer providing superior toughness and durability
- Water based, safe for use and shipment
- 4 gallon kit with pre-measured part A and B, just add together and mix
- Thin mil system allows for easy repair for damaged areas
- ESD floor meets ANSI/ESD S20.20 tested per ESD S7.1.
- RTT 10E4 - 10E6 ohms is suitable for ESD flooring component in Flooring - Footwear System as primary grounding method <3.5 x 10^7 ohms per ESD STM 97.1 Floor Materials and Footwear Resistance in Combination with a Person
- Enhance adhesion with 46058 Statguard® Epoxy Primer
- Made in America
Per Handbook ESD TR20.20 section 5.3.4.7.3 Epoxy and Polymeric Overlayments
“They have good chemical, solder, and abrasion resistance and will withstand heavy vehicle traffic. They are easier to maintain in comparison to other materials. They are seamless and can be used in many clean room environments.”
|
|