• Ergonomic design dome/support cell structure
  Suspended bounce feel, and matrix of “tri-radial” supports firming up as weight is applied improves worker comfort and productivity
  See Ergonomic Test Report.
• Durable homogenous rubber
  Will never delaminate
• Patented interlocking strip (Patent No. 5,907,934)
  Easily configures to fit your requirements; no need to order special lengths
• Interlocks are easily trimmed- no special tools required
  Attractive beveled edge end finish Can easily make stand-alone mat
• Tested for cleanrooms; minimal particulation
  Suitable for use in critical environments; used in Class 1000 cleanrooms
  See Test Report.
• RTG and RTT 10E4-10E5 ohms, suitable for flooring component in Flooring
  Footwear System as primary grounding method (3.5 x 10^7 ohms per ESD STM 97.1).  Meets ESD protective flooring requirements of ANSI/ESD S20.20<1 x 10E9 ohms and EIA-625
• 100% Premium Nitrile Butadiene Rubber
  Better value, prevents discoloring
• Durable industrial grade rubber
  Excellent value providing long-lasting wear properties, good-looking life; consistent electrical properties; will never delaminate
• Superior heat, chemical and wear resistance
  Excellent choice for around Wave solder machines, Automotive plants, and other challenging manufacturing environments
  Click Here for Chemical Resistance Chart
• Non-humidity dependence
  Provides consistent electrical performance regardless of ambient humidity
• Exceeds ANSI/ESD S20.20 required limit of <1 x 10E9 ohms for ESD floor
• Dimensionally stable
• Suitable for ESD floor- in ANSI/ESD STM 97.1 floor-footwear system
• Minimal shrinkage and curling
• Grounding Hardware not included
• Not suitable for use with chairs, carts, or wheels.
  See our conductive vinyl, Statfree CV^TM
• Our Reztore™ Surface & Mat Cleaner is great for cleaning floor mats
• Superior warranty - CLICK HERE.
• See in-use picture of Desco’s Statfree i™, click here
• Made in America

*RTT 10E4 - 10E5 ohms perr ANSI/ESD S7.1 “Conductive Flooring Material: A floor material that has a resistance to ground of less then 1.0 x 10E6 ohms.” (ESD STM7.1-2005 Definitions)

*Meets ANSI/ESD S20.20 Table 1 technical requirements recommendations and is suitable for ESD floor component in Flooring - Footwear System as primary grounding method <3.5 x 10E7ohms per ESD STM 97.1 Floor Materials and Footwear-Resistance in Combination with a Person.

“ESD protective flooring, used with approved footwear, may be used as an alternative to the wrist strap system for standing operations.” (ANSI/ESD S20.20 section 6.2.2.2 Personnel Grounding Guidance)

“The use of floor materials to control personnel or equipment generated static has a number of benefits. Floor materials tend to be passive. Employees who work in areas protected with floor materials simply need to wear and test the appropriate footwear. They do not need to implement any additional actions themselves to assure that the floor material is functioning properly.” (ESD Handbook TR20.20 section 5.3.4.4)

Due to variations in computer monitor displays, color shown may not be exact.  For true accurate color, please email Service@ESDSystems.com to request an actual sample.