• Ergonomic design dome/support cell structure
  Suspended bounce feel, and matrix of “tri-radial” supports firming up as weight is applied improves worker comfort and productivity
  See Ergonomic Test Report
• Durable homogenous rubber
  Will never delaminate
• Patented interlocking strip (Patent No. 5,907,934)
  Easily configures to fit your requirements; no need to order special lengths
• Interlocks are easily trimmed- no special tools required
  Attractive beveled edge end finish Can easily make stand-alone mat
• Tested for cleanrooms; minimal particulation
  Suitable for use in critical environments; used in Class 1000 cleanrooms
  See Test Report
• RTG and RTT 10E4-10E5 ohms, suitable for flooring component in Flooring
  Footwear System as primary grounding method (3.5 x 10^7 ohms per ESD STM 97.1).  Meets ESD protective flooring requirements of ANSI/ESD S20.20<1 x 10E9 ohms and EIA-625
• 100% Premium Nitrile Butadiene Rubber
  Better value, prevents discoloring
• Durable industrial grade rubber
  Excellent value providing long-lasting wear properties, good-looking life; consistent electrical properties; will never delaminate
• Superior heat, chemical and wear resistance
  Excellent choice for around Wave solder machines, Automotive plants, and other challenging manufacturing environments
  Click Here for Chemical Resistance Chart
• Non-humidity dependence
  Provides consistent electrical performance regardless of ambient humidity
• Exceeds ANSI/ESD S20.20 required limit of <1 x 10E9 ohms for ESD floor
• Dimensionally stable
• Suitable for ESD floor- in ANSI/ESD STM 97.1 floor-footwear system
• Minimal shrinkage and curling
• Grounding Hardware not included
• Not suitable for use with chairs, carts, or wheels.
  See our conductive vinyl, Statfree CV^TM
• Our Reztore™ Surface & Mat Cleaner is great for cleaning floor mats
• Superior warranty - CLICK HERE
• See in-use picture of Desco’s Statfree i™, click here
• Made in America

*RTT 10E4 - 10E5 ohms perr ANSI/ESD S7.1 “Conductive Flooring Material: A floor material that has a resistance to ground of less then 1.0 x 10E6 ohms.” (ESD STM7.1-2005 Definitions)

*Meets ANSI/ESD S20.20 Table 1 technical requirements recommendations and is suitable for ESD floor component in Flooring - Footwear System as primary grounding method <3.5 x 10E7ohms per ESD STM 97.1 Floor Materials and Footwear-Resistance in Combination with a Person.

“ESD protective flooring, used with approved footwear, may be used as an alternative to the wrist strap system for standing operations.” (ANSI/ESD S20.20 section 6.2.2.2 Personnel Grounding Guidance)

“The use of floor materials to control personnel or equipment generated static has a number of benefits. Floor materials tend to be passive. Employees who work in areas protected with floor materials simply need to wear and test the ap